With the KISS interface, you can use Reticulum over a variety of packet radio modems and TNCs, including OpenModem. KISS interfaces can also be configured to periodically send out beacons for station identification purposes.

[[Packet Radio KISS Interface]]

type = KISSInterface

interface_enabled = True

# Serial port for the device

port = /dev/ttyUSB1

# Set the serial baud-rate and other

# configuration parameters.

speed = 115200

databits = 8

parity = none

stopbits = 1

# Set the modem preamble.

preamble = 150

# Set the modem TX tail.

txtail = 10

# Configure CDMA parameters. These

# settings are reasonable defaults.

persistence = 200

slottime = 20

# You can configure the interface to send

# out identification on the channel with

# a set interval by configuring the

# following two parameters. The KISS

# interface will only ID if the set

# interval has elapsed since it's last

# actual transmission. The interval is

# configured in seconds.

# This option is commented out and not

# used by default.

# id_callsign = MYCALL-0

# id_interval = 600

# Whether to use KISS flow-control.

# This is useful for modems that have

# a small internal packet buffer, but

# support packet flow control instead.

flow_control = false

THIS IS A PART OF THE

Back to the Node Startpage